Coatings and Finishes

spray painting

Coatings and Finishes

Protect your equipment; Mikris Finishers Ltd in Stonehouse has an on-site certified NACE level 3 coating inspector.
protective coating

Protective coatings and finishes

We can assure our customers a quality product together with technical advice on all aspects of metal finishing or protective coatings. Certificates of conformity can be provided and we are fully conversant with SUBSEA, DEF.STAN and B.S.I. specs as well as being MOD approved.
 
Our finishes can be leatherette, texture, metallic, hammer, wrinkle, spatter, gloss, semi gloss, satin or matt.
a wide range of colours

Colours and colour matching

The standard colour ranges we use include RAL, BS381C, BS4800.
We can also obtain colours from other ranges including NCS, Pantone, Dulux and Farrow and Ball.
We have a close working relationship with many paint manufacturers and are able to source the appropriate paint for the job.

The types of coatings that we offer:

Below details the extensive range of finishes and coatings that we offer, the type of chemicals used in each process and the benefits of each coating system.

Powder Coating - Polyester, epoxy and epoxy polyester
  • Powder coating has become the modern industry choice. It offers superior protection over most wet paints and is seen as an environmentally friendly process
  • Speciality ranges of powders are growing all the time
  • We stock over 350 powders in a variety of finishes and gloss levels
Air Drying2 Pack, single pack, cellulose, base coat and lacquer
  • The choice of colours and finishes possible with wet paint is much greater than that in powder
Protective Coatings - Subsea, phenolic, epoxy, glassflake, etc.
  • We are capable of working to a variety of paint specifications
  • We have inspection instruments necessary to comply with the paint specs. (dew point hygrometer, digital thermometers, chloride contamination test kit, potassium ferricyanide test kit, digital profile gauge, DFT instruments, holiday detector and hydraulic adhesion tester)
Plastic Painting - PVCu, GRP, polythene, nylon, acrylics, Perspex, polyethylene and polypropylene
  • The coating system used chemically bonds to the substrate to form a permanently bonded UV stable coating
Stove enamelling
  • A wet paint that is baked in the oven and comes out fully cured
Other Coatings
  • Conductive, soft feel, suede effect and heat resistant
Wood - Stain or dye and clear lacquer
  • Wood finishes are either stripped, stained, clear lacquered, sanded and clear lacquered again or stripped, sealed and sanded prior to top coat being applied
MDF - Seal, prime and top coat
  • MDF items are sealed and sanded prior to top coat being applied
Have any questions?
surface being prepared

Give yourself the best start to ensure a fantastic finish. Take a look at our surface preparation services.
refurbishing

Rejuvenate old items with Mikris Finishers Ltd in Stonehouse. Restore auto and domestic items with us.
"I have just used Mikris to strip and powder coat my full suspension mountain bike in matt black. I had already masked up some bits but they took extra care to mask bearing housings etc. 
Thanks a lot guys, I will be coming back."
Chally
Contact us
For protective coatings and finishes contact Mikris Finishers Ltd in Stonehouse: 01453 763 873
Share by: